STARTER FASCIA VALLEY RIDGE CAP SHED RIDGE CAP TRANSITION HIP GABLE FLASHING WALL FLASHING CHIMNEY FLASHING PIPE FLASHING HEADWALL TRIM ACCENT TRIM END CAP RIDGE TAPE EXPANDING FOAM SNOWGUARD SOFFIT ROOF VENTS MEMBRANE ICE & WATER SHILD

Material from 26 gauge, Z275 (G90) galvanized steel, Grade FSB or PFQ DS

Weight - 0.96 Lb/sqft

Finish  - BeckreTech (Granite Deep Mat) finish. ASTM  A755/A755M-11

Position the Ridge Cap at the peak of the roof and square with the front edge. Then, align the Ridge Capso that flanges extend down on each side of the roof equal distance. Place Fabric Ridge Tape under the Ridge Cap or the Ridge Seal. Lastly, fasten the Ridge Cap to the panels at the top of every other rib.After the Ridge Cap has been installed, close off the Ridge at each end of the roof by placing End Cap in the area.

Back to Accessories Home Page